Fraunhofer-Institut für Werkstoff- und Strahltechnik IWSFraunhofer IWS
Hier finden Sie aktuelle Publikationen des Fraunhofer IWS aus dem Jahr 2022.
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2022 | Direct printing of heating elements for thermal control systems of spacecraft Aldorf, Michael; Greifzu, Moritz; Berlin, Marten; Salmanow, Jaschar; Weg, Jonas vom; Holz, Andre; Stepien, Lukas |
Vortrag Presentation |
| 2022 | Experimental Apparatus for Evaluation of Calcium Fluctuations in Cardiomyocytes Derived from Human-Induced Pluripotent Stem Cells Araña, M.C.; Lahuerta, R.D.; Cortella, L.R.X.; Mazzetto, M.; Soldera, M.; Lasagni, Andrés-Fabián; Cestari, I.N.; Cestari, I.A. |
Konferenzbeitrag Conference Paper |
| 2022 | Influencing the contact angle during brazing by direct laser interference structured textures on the substrate surface Baumann, R.; Heilmann, S.; Köberlin, D.; Füssel, U.; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Advanced remote laser cutting of battery foils using an interference approach Baumann, Robert; Alamri, Sabri; Aguilar-Morales, Alfredo I.; Lasagni, Andrés F.; Kunze, Tim |
Zeitschriftenaufsatz Journal Article |
| 2022 | ATHENA optics technology development Bavdaz, Marcos; Wille, Eric; Ayre, Mark; Ferreira, Ivo; Shortt, Brian; Fransen, Sebastiaan H.J.A.; Millinger, Mark; Collon, Maximilien J.; Vacanti, Giuseppe; Barriére, Nicolas M.; Landgraf, Boris; Olde Riekerink, Mark; Haneveld, Jeroen; Start, Ronald; Baren, Coen V. van; Della Monica Ferreira, Desiree; Massahi, Sonny; Svendsen, Sara; Christensen, Finn E.E.; Krumrey, Michael K.; Handick, Evelyn; Burwitz, Vadim; Pareschi, Giovanni; Salmaso, Bianca; Moretti, Alberto; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis; Lupton, Paul; Mundon, William; Phillips, Gavin; Schneider, Jakob; Korhonen, Tapio K.; Sánchez, Alejandro; Heinis, Dominique; Colldelram, Carles; Tordi, Massimiliano; Lorenzi, Simone de; Willingale, Richard |
Konferenzbeitrag Conference Paper |
| 2022 | New joining and automation approaches for multilayer-based manufacturing of complex, customized microsystems Behrens, Stephan; Himmer, Thomas; Kühsel, Uwe; Schmieder, Florian; Klaue, Daniel; Günther, Katja; Sonntag, Frank |
Konferenzbeitrag Conference Paper |
| 2022 | Wettability after Artificial and Natural Weathering of Polyethylene Terephthalate Benke, Annegret; Sonnenberg, Johanna; Oelschlägel, Kathrin; Schneider, Markus; Lux, Milena; Potthoff, Annegret |
Zeitschriftenaufsatz Journal Article |
| 2022 | Integration of Diffractive Optics for Top-Hat Generation and Enhanced Depth of Focus Bischoff, Christian; Rädel, Ulrich; Umhofer, Udo; Jäger, Erwin; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Mechanistic insights into the reversible lithium storage in an open porous carbon via metal cluster formation in all solid-state batteries Bloi, Luise Maria; Hippauf, Felix; Boenke, Tim; Rauche, Marcus; Paasch, Silvia; Schutjajew, Konstantin; Pampel, Jonas; Schwotzer, Friedrich; Dörfler, Susanne; Althues, Holger; Oschatz, Martin; Brunner, Eike; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys Bodner, Sabine C.; Hlushko, Konstiantyn; Vorst, L.T.G. van de; Meindlhumer, Michael; Todt, Juraj; Nielsen, Marc-André; Hooijmans, J.W.; Saurwalt, J.J.; Mirzaei, Saeed; Keckes, Jozef |
Zeitschriftenaufsatz Journal Article |
| 2022 | Numerical analysis of the primary gas boundary layer flow structure in laser fusion cutting in context to the striation characteristics of cut edges Borkmann, Madlen; Mahrle, Achim |
Zeitschriftenaufsatz Journal Article |
| 2022 | Low-cost strategy for processing hierarchical surface textures on PET foils with modified wetting behavior and increased outcoupling efficiency for OLEDs Bouchard, Felix; Kovacic, Milan; Samigullina, Dinara; Krč, Janez; Lipovšek, Benjamin; Soldera, Marcos; Baumann, Robert; Reineke, Sebastian; Topič, Marko; Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Influence of Structure Size and Geometry on Wetting Behavior of PMMA Surfaces Imprinted with Laser-Textured Stamps Bouchard, Felix; Wang, Wei; Soldera, Marcos; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Angular dependence of coaxial and quasi-coaxial monitoring systems for process radiation analysis in laser materials processing Brandau, Benedikt; Mai, Torsten; Brückner, Frank; Kaplan, Alexander F.H. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Absorbance study of powder conditions for laser additive manufacturing Brandau, Benedikt; Silva, Adrien Da; Wilsnack, Christoph; Brueckner, Frank; Kaplan, Alexander F.H. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Sustainable laser metal deposition of aluminum alloys for the automotive industry Bruzzo, Francesco; Medapati, Mehar Prakash Reddy; Pullini, Daniele; Ronco, Fabio; Bertinetti, Andrea; Tommasi, Alessio; Riede, Mirko; Lopez, Elena; Brückner, Frank |
Zeitschriftenaufsatz Journal Article |
| 2022 | Tribocorrosion behavior of NiTi biomedical alloy processed by an additive manufacturing laser beam directed energy deposition technique Buciumeanu, Mihaela; Bagheri, Allen; Silva, Filippe Samuel; Henriques, Bruno; Lasagni, Andrés-Fabián; Shamsaei, Nima |
Zeitschriftenaufsatz Journal Article |
| 2022 | A comparison of the tactile friction and cutting performance of textured scalpel blades modified by Direct Laser Writing and Direct Laser Interference Patterning processes Butler-Smith, Paul; See, Tian Long; Humphrey, Edward; Godoy Vilar, Juan; Steege, Tobias; Kunze, Tim; Schell, Frederic; Serey, Nicolas; Horvatek Tomic, Danijela |
Zeitschriftenaufsatz Journal Article |
| 2022 | Solution-Processable Hole-Transporting Polymers: Synthesis, Doping Study and Crosslinking Induced by UV-Irradiation or Huisgen-Click Cycloaddition Caldera-Cruz, E.; Zhang, K.; Tsuda, T.; Tkachov, Roman; Beryozkina, T.; Kiriy, N.; Voit, B.; Kiriy, A. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Surface Functionalization of LiNi7.0Co0.15Mn0.15O2 with Fumed Li2ZrO3 via a Cost-Effective Dry‐Coating Process for Enhanced Performance in Solid‐State Batteries Cangaz, Sahin; Hippauf, Felix; Takata, Ryo; Schmidt, Franz; Dörfler, Susanne; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Surface Topography Obtained with High Throughput Technology for hiPSC-Derived Cardiomyocyte Conditioning Cortella, Lucas R.X.; Cestari, I.A.; Soldera, Mariana; Mazzetto, M.; Lasagni, Andrés-Fabián; Cestari, Ismar N. |
Konferenzbeitrag Conference Paper |
| 2022 | Influence of aluminium powder aging on Directed Energy deposition Da Silva, Adrien; Belelli, Filippo; Lupi, Giorgia; Bruzzo, Francesco; Brandau, Benedikt; Maier, Lukas; Pesl, Alexander; Frostevarg, Jan; Casati, Riccardo; Lopez, Elena; Kaplan, Alexander F.H. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Characterization and Evaluation of Engineered Coating Techniques for Different Cutting Tools - Review Dabees, Sameh; Mirzaei, Saeed; Kaspar, Pavel; Holcman, Vladimír; Sobola, Dinara |
Zeitschriftenaufsatz Journal Article |
| 2022 | Laser beam welding of hot crack sensitive Al-alloys without filler wire by intensity controlled dynamic beam oscillation Dittrich, Dirk; Keßler, Benjamin; Strohbach, Robert; Jahn, Axel |
Zeitschriftenaufsatz Journal Article |
| 2022 | Verfahren und Vorrichtung zum Schneiden einer metallhaltigen Folie und Laser-geschnittene metallhaltige Folie Eckl, Maximilian Josef; Mäder, Gerrit; Roch, Julius; Thümmler, Philipp; Abendroth, Thomas |
Patent |
| 2022 | Utilizing a diffractive focus beam shaper to enhance pattern uniformity and process throughput during direct laser interference patterning El-Khoury, Mikhael; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Effect of the tool geometry on microstructure and geometrical features of clinched aluminum Ewenz, L.; Kuczyk, M.; Zimmermann, M. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung Ewenz, Lars; Schöne, Sebastian; Zimmermann, Martina |
Konferenzbeitrag Conference Paper |
| 2022 | Numerical and experimental identification of fatigue crack initiation sites in clinched joints Ewenz, Lars; Bielak, Christian Roman; Otroshi, Mortaza; Bobbert, Matthias; Meschut, Gersun; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Influence of AlSi10Mg powder aging on the material degradation and its processing in laser powder bed fusion Fedina, Tatiana V.; Belelli, Filippo; Lupi, Giorgia; Brandau, Benedikt; Casati, Riccardo; Berneth, Raphael; Brückner, Frank; Kaplan, Alexander Friedrich Hermann |
Zeitschriftenaufsatz Journal Article |
| 2022 | Anordnung zur Ausrichtung, Rotation und/oder Formung eines Laserstrahls Franke, Volker; Panzner, Michael; Kretzschmar, Frank |
Patent |
| 2022 | Funktionalisieren von Faser-Kunststoff-Verbunden Franke, Volker; Gebauer, Jana |
Zeitschriftenaufsatz Journal Article |
| 2022 | Vorrichtung zur Ausrichtung, Rotation und/oder Formung eines Laserstrahls Franke, Volker; Panzner, Michael; Kretzschmar, Frank |
Patent |
| 2022 | Prediction of the Quality of Thermally Sprayed Copper Coatings on Laser-Structured CFRP Surfaces Using Hyperspectral Imaging Gebauer, Jana; Gruber, Florian; Holfeld, Wilhelm; Grählert, Wulf; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Optical transitions and photocatalytic activity of NiSe films prepared by the chemical solution deposition method Ghobadi, Nader; Arman, Ali; Sadeghi, Mohammad; Luna, Carlos; Mirzaei, Saeed; Zelati, Amir; Shakoury, Reza |
Zeitschriftenaufsatz Journal Article |
| 2022 | Development of a Graphite Coating and its Transfer from Batch to Coil Process for Application in PEMFC for Hydrogen-Powered Vehicles Giorgio, Maurizio; Steinhorst, Maximilian; Topalski, Slavcho; Roch, Teja; Leyens, Christoph |
Zeitschriftenaufsatz Journal Article |
| 2022 | Bildgebende Fluoreszenzspektroskopie als Sensortechnologie für die Verwertung schwarzer Kunststoffe Gruber, Florian |
Dissertation Doctoral Thesis |
| 2022 | Design procedure for triply periodic minimal surface based biomimetic scaffolds Günther, Fabian; Wagner, Markus; Pilz, Stefan; Gerbert, Annett; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Structure-property relationships of imperfect additively manufactured lattices based on triply periodic minimal surfaces Günther, Fabian; Hirsch, Franz Wolfgang; Pilz, Stefan; Wagner, Markus; Gebert, Annett; Kästner, Markus; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Microstructure, fractal geometry and corrosion properties of CrN thin films: The effect of shot number and angular position Habibi, M.; Mirzaei, Saeed; Arman, A.; Jurečka, S.; Sadeghi, M.; Zelati, A.; Shakoury, R.; Tanhaee, E.; Ghobadi, N.; Ehteram, H.; Ţălu, S. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Porous Dithiine-Linked Covalent Organic Framework as a Dynamic Platform for Covalent Polysulfide Anchoring in Lithium–Sulfur Battery Cathodes Haldar, Sattwick; Wang, Mingchao; Bhauriyal, Preeti; Hazra, Arpan; Khan, Arafat H.; Bon, Volodymyr; Isaacs, Mark A.; De, Ankita; Shupletsov, Leonid; Boenke, Tom; Grothe, Julia; Heine, Thomas; Brunner, Eike; Feng, Xinliang; Dong, Renhao; Schneemann, Andreas; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response Hariharan, Avinash; Goldberg, Phil; Gustmann, Tobias; Maawad, Emad; Pilz, Stefan; Schell, Frederic; Kunze, Tim; Zwahr, Christoph; Gebert, Annett |
Zeitschriftenaufsatz Journal Article |
| 2022 | Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations Harzheim, Sven; Ewenz, Lars; Zimmermann, Martina; Wallmersperger, Thomas |
Zeitschriftenaufsatz Journal Article |
| 2022 | Separatorplatte Hausmann, Philipp; Bressel, Arnd; Heinemann, Jan Peter; Müller, Marc-Vincent; Kinlechner, Linda; Eichelmann, Martin; Roch, Teja |
Patent |
| 2022 | Elektrochemische Charakterisierung von dotierten, amorphen Kohlenstoffschichten Hebenstreit, Julius |
Master Thesis |
| 2022 | Optical Enhancement of Fluorine‐Doped Tin Oxide Thin Films using Infrared Picosecond Direct Laser Interference Patterning Heffner, Herman; Soldera, Marcos; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Effects of sub-picosecond direct laser interference patterning on the optoelectronic properties of fluorine-doped tin oxide thin films Heffner, Herman; Soldera, Marcos; Schell, Frederic; Deconinck, Marielle; Vaynzof, Yana; Mulko, Lucinda; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Simulation des LPBF-Prozess mit dem Fokus auf der lokalen Abbildung der Temperaturhistorie im Bauteil Heinze, Stefan; Kühne, Robert; Töppel, Thomas; Leyens, Christoph |
Vortrag Presentation |
| 2022 | NDE for Additive Manufacturing Hendl, Julius; Marquardt, Axel; Willner, Robin; Lopez, Elena; Brückner, Frank; Leyens, Christoph |
Aufsatz in Buch Book Article |
| 2022 | Sandstrahlen mit Licht - wie geht das? Herwig, Patrick |
Zeitschriftenaufsatz Journal Article |
| 2022 | Laserbearbeitungskopf mit einem Gehäuse und einer Schweißdüse Hillig, Holger; Kaubisch, Marc; Leingruber, Marvin |
Patent |
| 2022 | Vorrichtung zur Ausbildung von amorphen Kohlenstoffschichten auf Bauteiloberflächen mit reduzierter Oberflächenrauheit Hofmann, Falko; Weihnacht, Volker; Kaulfuß, Frank |
Patent |
| 2022 | Low-Friction of ta-C Coatings Paired with Brass and Other Materials under Vacuum and Atmospheric Conditions Härtwig, Fabian; Lorenz, Lars; Makowski, Stefan; Krause, Matthias; Habenicht, Carsten; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Molecular dynamics study on the crack propagation in carbon doped polycrystalline boron-nitride nanosheets Jam, Amir Namazian; Jam, Negin Namazian; Izadifar, Mohammadreza; Rabczuk, Timon |
Zeitschriftenaufsatz Journal Article |
| 2022 | Study of Si-domains enabling local reduction of laser-melted iron ore for iron-making during 3D-printing Kaplan, Alexander F.H.; Fedina, Tatiana; Brückner, Frank |
Zeitschriftenaufsatz Journal Article |
| 2022 | Metal-Organic Frameworks: Special Collection 2020 Kaskel, Stefan; D'Alessandro, D.; Bennett, T.D.; Moon, H.R. |
Editorial |
| 2022 | Lithium‐Sulfur Batteries: Current Achievements and Further Development Kaskel, Stefan; Huang, Jia-Qi; Sakaebe, Hikari |
Editorial |
| 2022 | Prüfstrategien zur in-situ Charakterisierung von interaktiven Faser-Elastomer-Verbunden und ihren Komponenten Katzer, Konrad |
Dissertation Doctoral Thesis |
| 2022 | Thermo-electro-mechanical characterization of PDMS-Based dielectric elastomer actuators Katzer, Konrad; Kanan, Anas; Pfeil, Sascha; Grellmann, Henriette; Gerlach, Gerald; Kaliske, Michael; Cherif, Chokri; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Schweißnahtgüte und Schwingfestigkeit lasergeschweißter Verbindungen aus Aluminium Knet- und Druckgusswerkstoffen Keßler, Benjamin; Teichmann, Fabian; Dittrich, Dirk; Wagner, Markus; Hensel, Tom; Dilger, Klaus; Jahn, Axel |
Konferenzbeitrag Conference Paper |
| 2022 | Investigation of surface defects. Part 2: Coating properties, SEM analysis, final conclusions Knilie, Tim; Kaulfuß, Frank; Weihnacht, Volker; Peritsch, Paul; Bui Thi, Yana; Zawischa, Martin |
Zeitschriftenaufsatz Journal Article |
| 2022 | Novel Fe-0.3Cr-0.4Mo-1.5Mn-3Ni-0.6C tool steel with superior properties under quasi-static and dynamic loading Kochta, Fabian; Kühn, Uta; Henschel, Sebastian; Giebeler, Lars; Gemmig, Thomas; Neufeld, Kai; Leyens, Christoph; Krüger, Lutz; Hufenbach, Julia Kristin |
Zeitschriftenaufsatz Journal Article |
| 2022 | Effect of Barium Titanate Particle Filler in Soft Silicone Films on their Application in Dielectric Elastomer Actuators Koenigsdorff, Markus; Liebscher, Hans; Endesfelder, Anett; Zhang, Qichen; Zimmermann, Martina; Gerlach, Gerald |
Konferenzbeitrag Conference Paper |
| 2022 | Investigation of surface defects Krülle, Tim; Kaulfuß, Frank; Bui Thi, Yana; Peritsch, Paul; Weihnacht, Volker; Zawischa, Martin |
Zeitschriftenaufsatz Journal Article |
| 2022 | Amorphous Carbon Coatings with Different Metal and Nonmetal Dopants: Influence of Cathode Modification on Laser-Arc Evaporation and Film Deposition Krülle, Tim; Kaulfuß, Frank; Weihnacht, Volker; Hofmann, Falko; Kirsten, Florian |
Zeitschriftenaufsatz Journal Article |
| 2022 | Microstructure and mechanical properties of high entropy alloy nitride coatings deposited via direct current cathodic vacuum arc deposition Kuczyk, Martin; Krülle, Tim; Zawischa, Martin; Kaspar, Joerg; Zimmer, Otmar; Leonhardt, Michael; Leyens, Christoph; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Laser-based surface smoothing and subsequently interference patterning of additive manufactured materials to influence their wetting behavior Kuisat, F.; Ränke, F.; Baumann, R.; Lasagni, F.; Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Laser-based surface modification and its influence on the topography and wettability of a new additively manufactured aluminum-based alloy Kuisat, Florian; Ränke, Fabian; Baumann, Robert; Palm, Frank; Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Fabrication of water- and ice-repellent surfaces on additive-manufactured components using laser-based microstructuring methods Kuisat, Florian; Ränke, Fabian; Baumann, Robert; Lasagni, Fernando A.; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Ermüdungsverhalten und Lebensdauerabschätzung von L-PBF Ti-6Al-4V Kühne, Robert; Bittner, Florian; Gruber, Samira; Schettler, Sebastian; Stampa, Leonhard; Töppel, Thomas; Zimmermann, Martina |
Vortrag Presentation |
| 2022 | Neue Prüfkonzepte für Hartlötverbindungen Kühne, Robert; Schettler, Sebastian; Heilmann, Stefan; Füssel, Uwe; Zimmermann, Martina |
Konferenzbeitrag Conference Paper |
| 2022 | Analyzing the Electromagnetic Radiations Emitted during a Laser-based Surface Pre-Treatment Process for Aluminium using Diode Sensors as an Approach for High-Resolution Online Monitoring Langenheinecke, Hans Julius; Tutunjian, Shahan; Soldera, Marcos; Wegner, Torsten; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | How laser-based fabrication methods can be used to produce multifunctional surfaces Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Electrically conductive polymer nanocomposites for thermal comfort in electric vehicles Leicht, Heinrich; Kraus, Eduard; Baudrit, Benjamin; Hochrein, Thomas; Bastian, Martin; Langer, Maurice |
Aufsatz in Buch Book Article |
| 2022 | Tribologie polymerbasierter Verbundwerkstoffe Leson, Andreas |
Zeitschriftenaufsatz Journal Article |
| 2022 | Towards robust dynamic beam shaping for laser cutting applications Levichev, Nikita; Herwig, Patrick; Wetzig, Andreas; Duflou, Joost R. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Bioactive Ion‐Based Switchable Supercapacitors Li, Panlong; Bräuniger, Yannik; Kunigkeit, Jonas; Zhou, Hanfeng; Ortega Vega, Maria Rita; Zhang, En; Grothe, Julia; Brunner, Eike; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Achieving superlubricity using selected tribo-pairs lubricated by castor oil and unsaturated fatty acids Long, Yun; Galipaud, Jules; Weihnacht, Volker; Makowski, Stefan; Martin, Jean Michel; Barros Bouchet, Maria Isabel de |
Zeitschriftenaufsatz Journal Article |
| 2022 | Mechanism of superlubricity of a DLC/Si3N4 contact in the presence of castor oil and other green lubricants Long, Yun; Wang, Yang; Weihnacht, Volker; Makowski, Stefan; Kubo, Momoji; Martin, Jean Michel; Barros Bouchet, Maria Isabel de |
Zeitschriftenaufsatz Journal Article |
| 2022 | Advantages of Using Triboscopic Imaging: Case Studies on Carbon Coatings in Non-Lubricated Friction Conditions Lorenz, Lars; Makowski, Stefan; Weihnacht, Volker; Krause, Matthias; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Triboscopic Investigation of Self-Mated Carbon Coatings in Non-Lubricated Friction Conditions Lorenz, Lars; Härtwig, Fabian; Makowski, Stefan; Krause, Matthias; Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Fundamental investigations on the laser-melting of lignocellulosic fibres Lull, Florian; Zahel, Martin; Panzner, Michael; Schilling, Tom |
Zeitschriftenaufsatz Journal Article |
| 2022 | Special Issue Featuring Papers from the International Thermal Spray Conference (ITSC) 2021 Mcdonald, A.; Azarmi, F.; Balani, K.; Cizek, J.; Koivuluoto, H.; Lau, Y.C.; Li, H.; Toma, Filofteia-Laura |
Editorial |
| 2022 | Large-Scale Synthesis of Nanostructured Carbon-Ti4O7 Hollow Particles as Efficient Sulfur Host Materials for Multilayer Lithium-Sulfur Pouch Cells Mei, S.; Siebert, A.; Xu, Y.; Quan, T.; Garcia-Diez, R.; Bär, M.; Härtel, Paul; Abendroth, Thomas; Dörfler, Susanne; Kaskel, Stefan; Lu, Y. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Friction Response of Piston Rings for Application-like Starvation and Benefit of Amorphous Carbon Coatings Michelberger, Björn; Jaitner, Dirk; Hagel, Andreas; Striemann, Patrick; Kröger, Benjamin; Wetzel, Franz-Josef; Leson, Andreas; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Modelling and Validation of Microstructure Replication on Aluminum Foils from Laser-Patterned Stamps Moghtaderifard, Stephan; Soldera, Marcos; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Customizable-Width Conducting Polymer Micro/Nanoarrays by Subpicosecond Laser Interference Patterning Mulko, Lucinda; Heffner, Herman; Abel, Silvestre Bongiovanni; Baumann, Robert; Martín, Dolores; Schell, Frederic; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Understanding the Relation between Pulse Duration and Topography Evolution of Polyether Ether Ketones Textures by Ultrashort Infrared Laser Interference Patterning Mulko, Lucinda; Wang, Wei; Baumann, Robert; Kress, Joshua; Voisiat, Bogdan; Jaeger, Erwin; Leupolt, Beate; Vaynzof, Yana; Soldera, Marcos; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Kornformbeeinflussung durch ultraschallunterstütztes Laser‐Draht‐Auftragschweißen Mätje, Jacob-Florian |
Diplomarbeit Diploma Thesis |
| 2022 | Investigation of the effect of carbon post- vs pre-coated metallic bipolar plates for PEMFCs - start-up and shut-down Müller, Marc-Vincent; Giorgio, Maurizio; Hausmann, Philipp; Kinlechner, Linda; Heinzel, Angelika; Schwämmlein, Jan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Multimaterial additive manufacturing of graded laves phase reinforced NiAlTa structures by means of Laser Metal Deposition Müller, Michael; Stellmacher, Andre; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph |
Zeitschriftenaufsatz Journal Article |
| 2022 | Operando Radiography and Multimodal Analysis of Lithium-Sulfur Pouch Cells - Electrolyte Dependent Morphology Evolution at the Cathode Müller, R.; Manke, I.; Hilger, A.; Kardjilov, N.; Boenke, Tom; Reuter, Florian; Dörfler, Susanne; Abendroth, Thomas; Härtel, Paul; Althues, Holger; Kaskel, Stefan; Risse, S. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Blown powder directed energy deposition on various substrate conditions Naesstroem, Himani; Brückner, Frank; Kaplan, Alexander F.H. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Investigation into microstructure and mechanical properties effects on sliding wear and cavitation erosion of Al2O3-TiO2 coatings sprayed by APS, SPS and S-HVOF Nowakowska, Monika; Łatka, Leszek; Sokołowski, Paweł; Szala, Mirosław; Toma, Filofteia-Laura; Walczak, Mariusz |
Zeitschriftenaufsatz Journal Article |
| 2022 | Label-free detection of SARS-CoV-2 neutralizing antibodies in human serum by Bloch surface waves on 1D photonic crystal biochips Occhicone, Agostino; Sinibaldi, Alberto; Pileri, Tommaso; Matteo, Paola di; Chiappetta, Daniele; Munzert, Peter; Danz, Norbert; Sonntag, Frank; Allegretti, M.; Pascale, V. de; Mandoj, C.; Conti, L.; Michelotti, F. |
Konferenzbeitrag Conference Paper |
| 2022 | Compliant continuum gripper powered by dielectric elastomers based on anisotropic bending stiffness caused by integrated textile materials Pfeil, S.; Katzer, Konrad; Koenigsdorff, M.; Zimmermann, Martina; Gerlach, G. |
Konferenzbeitrag Conference Paper |
| 2022 | Präzise Inline-Prozessüberwachung beim Laserstrahlschweißen durch die Kombination multipler Sensorik und maschinellem Lernen Pietsch, Dominik; Wagner, Markus; Schwarzenberger, Michael; Jahn, Axel; Dittrich, Dirk; Ihlenfeldt, Steffen |
Konferenzbeitrag Conference Paper |
| 2022 | Enhanced fluorescence detection of miRNAs using one-dimensional photonic crystal-based biochips Pileri, T.; Sinibaldi, A.; Danz, Norbert; Pignataro, G.; Munzert, Peter; Occhicone, A.; Sonntag, Frank; Michelotti, F. |
Konferenzbeitrag Conference Paper |
| 2022 | Controlling the Young’s modulus of a ß-type Ti-Nb alloy via strong texturing by LPBF Pilz, Stefan; Gustmann, Tobias; Günther, Fabian; Zimmermann, Martina; Kühn, Uta; Gebert, Annett |
Zeitschriftenaufsatz Journal Article |
| 2022 | Human endothelial cells form an endothelium in freestanding collagen hollow filaments fabricated by direct extrusion printing Prade, Ina; Schröpfer, Michaela; Seidel, Caroline; Krumbiegel, Claudia; Hille, Tina; Sonntag, Frank; Behrens, Stephen; Schmieder, Florian; Voigt, Birgit; Meyer, Michael |
Zeitschriftenaufsatz Journal Article |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2022 | Benzene bridged hybrid organosilicate films with improved stiffness and small pore size Rezvanov, Askar; Vishnevskiy, Alexey; Seregin, Dmitry; Schneider, Dieter; Lomov, Artur; Vorotilov, Konstantin; Baklanov, Mikhail R. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Roll-to-Roll Coating and Forming of Stainless Steel for Metallic Bipolar Plates Roch, Teja; Giorgio, Maurizio; Topalski, Slavcho; Porstmann, Sebastian; Polster, Stefan |
Vortrag Presentation |
| 2022 | Verfahren zum Trennen von oder der Ausbildung eines Schnittspaltes in Faserverbund-Bauteilen mit Laserstrahlung Rose, Michael; Mickan, Alexander |
Patent |
| 2022 | High throughput laser surface micro-structuring of polystyrene by combining direct laser interference patterning with polygon scanner technology Ränke, F.; Baumann, R.; Voisiat, B.; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Influence of laser beam oscillation on the cutting front geometry investigated by high-speed 3D-measurements Sawannia, Michael; Borkmann, Madlen; Herwig, Patrick; Wetzig, Andreas; Weber, Rudolf; Graf, Thomas |
Zeitschriftenaufsatz Journal Article |
| 2022 | On the wetting behavior of laser-microtextured stainless steel using Direct Laser Interference Patterning Schell, Frederic; Alamri, Sabri; Steege, Tobias; Zwahr, Christoph; Kunze, Tim; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | From infrared to ultraviolet: Direct laser interference patterning of additively manufactured titanium alloy using a picosecond laser Schell, Frederic; Hariharan, Avinash; Goldberg, Phil; Alamri, Sabri; Gebert, Annett; Kunze, Tim; Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Fabrication of four-level hierarchical topographies through the combination of LIPSS and direct laser interference pattering on near-beta titanium alloy Schell, Frederic; Alamri, Sabri; Hariharan, Avinash; Gebert, Annett; Lasagni, Andrés-Fabián; Kunze, Tim |
Zeitschriftenaufsatz Journal Article |
| 2022 | Pulse Duration and Wavelength Effects on the Surface Topography of Direct Laser Interference Patterning Treated Titanium Specimen Schell, Frederic; Hariharan, Avinash; Goldberg, Phil; Baumann, Robert; Jäger, Erwin; Gebert, Annett; Zwahr, Christoph; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Electrochemical Patterning of Cu Current Collectors: An Enabler for Pure Silicon Anodes in High‐Energy Lithium‐Ion Batteries Schlaier, Jonas; Cangaz, Sahin; Maletti, Sebastian; Heubner, Christian; Abendroth, Thomas; Schneider, Michael; Kaskel, Stefan; Michaelis, Alexander |
Zeitschriftenaufsatz Journal Article |
| 2022 | Experimental-Numerical Analysis of Microstructure-Property Linkages for Additively Manufactured Materials Schmidt, Benjamin; Raßloff, Alexander; Kühne, Robert; Zimmermann, Martina; Kästner, Markus |
Aufsatz in Buch Book Article |
| 2022 | The importance of swelling effects on cathode density and electrochemical performance of lithium-sulfur battery cathodes produced via dry processing Schmidt, Florian; Ehrling, Sebastian; Schönherr, Kay; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Influence of external stack pressure on the performance of Li-S pouch cell Schmidt, Florian; Korzhenko, Alexander; Härtel, Paul; Reuter, Florian; Ehrling, Sebastian; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Sustainable protein‐based binder for Lithium‐Sulfur cathodes processed by a solvent‐free dry‐coating method Schmidt, Florian; Kirchhoff, Sebastian; Jägle, Karin; De, Ankita; Ehrling, Sebastian; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Schumm, Benjamin; Althues, Holger; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Vorrichtung und Verfahren zur Separation von unterschiedlich großen Partikeln in einer Flüssigkeit und Verwendungen der Vorrichtung Schmieder, Florian |
Patent |
| 2022 | Vorrichtung und Verfahren zur Separation von Partikeln in einer Flüssigkeit, Kit enthaltend die Vorrichtung und Verwendungen der Vorrichtung Schmieder, Florian; Langer, Maurice; Gerdes, Wilhelm; Katzer, Konrad; Berthold, Rommy |
Patent |
| 2022 | KTeXpand - a novel microfluidic device for advanced cell based cross matching Schneider, Daniel; Behrens, Stephan; Philipp, Jürgen; Eitler, Jiri; Stumpf, Julian; Tonn, Torsten; Sonntag, Frank; Hugo, Christian P.M.; Schmieder, Florian |
Zeitschriftenaufsatz Journal Article |
| 2022 | Scalable production of large components by industrial robots and machine tools through segmentation Schnellhardt, Thorben; Hemschik, Rico; Weiß, Arno; Schoesau, René; Hellmich, Arvid; Ihlenfeldt, Steffen |
Zeitschriftenaufsatz Journal Article |
| 2022 | Hard x-ray wavefront engineering for aberration correction and beam shaping Schroer, Christian G.; Seiboth, Frank; Schropp, Andreas; Achilles, Silvio; Seyrich, Martin; Patjens, Svenja; Stuckelberger, Michael E.; Garrevoet, Jan; Galbierz, Vanessa; Falkenberg, Gerald; Kubec, Adam; David, Christian; Niese, Sven; Gawlitza, Peter |
Konferenzbeitrag Conference Paper |
| 2022 | Approach for monitoring the topography of laser-induced periodic surface structures using a diffraction-based measurement method Schröder, Nikolai; Fischer, Christoph; Soldera, Marcos; Bouchard, Felix; Voisiat, Bogdan; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Heating influence on hierarchical structures fabricated by direct laser interference patterning Schröder, Nikolai; Nyenhuis, Fabian; Baumann, Robert; Mulko, Lucinda; Kiedrowski, Thomas; L’huillier, Johannes Albert; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Structure and characterization of vacuum arc deposited carbon films - A critical overview Schultrich, Bernd |
Zeitschriftenaufsatz Journal Article |
| 2022 | Cooperative Assembly of 2D‐MOF Nanoplatelets into Hierarchical Carpets and Tubular Superstructures for Advanced Air Filtration Schwotzer, Friedrich; Horak, Jacob; Senkovska, Irena; Schade, Elke; Gorelik, Tatiana E.; Wollmann, Philipp; Anh, Mai Lê; Ruck, Michael; Kaiser, Ute; Weidinger, Inez M.; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | VHCF Behavior of Inconel 718 in Different Heat Treatment Conditions in a Hot Air Environment Schöne, Sebastian; Schettler, Sebastian; Kuczyk, Martin; Zawischa, Martin; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Untersuchung des Frequenzeinflusses auf das Ermüdungsverhalten des Magnesiumblechwerkstoffs AZ31 Schöne, Sebastian; Kirsten, Tina; Kuczyk, Martin; Zimmermann, Martina |
Konferenzbeitrag Conference Paper |
| 2022 | Liquid lithium metal processing into ultrathin metal anodes for solid state batteries Schönherr, Kay; Schumm, Benjamin; Hippauf, Felix; Lissy, Robin; Althues, Holger; Leyens, Christoph; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Rapid aberration correction for diffractive X-ray optics by additive manufacturing Seiboth, Frank; Kubec, Adam; Schropp, Andreas; Niese, Sven; Gawlitza, Peter; Garrevoet, Jan; Galbierz, Vanessa; Achilles, Silvio; Patjens, Svenja; Stuckelberger, Michael E.; David, Christian; Schroer, Christian |
Zeitschriftenaufsatz Journal Article |
| 2022 | Modification of Polymeric Surfaces with Ultrashort Laser Pulses for the Selective Deposition of Homogeneous Metallic Conductive Layers Seiler, Michael; Knauft, Andreas; Gruben, Jann Jelto; Frank, Samson; Barz, Andrea; Bliedtner, Jens; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Mechanical and geometrical characterization of additively manufactured INCONEL® 718 porous structures for transpiration cooling in space applications Selbmann, Alex; Gruber, Samira; Stepien, Lukas; Lopez, Elena; Marquardt, Axel; Brückner, Frank; Leyens, Christoph |
Konferenzbeitrag Conference Paper |
| 2022 | Introducing micro physiological systems to evaluate new radiopharmaceuticals: A binding study with radiolabeled cetuximab Sihver, Wiebke; Nitt-Weber, Anne Kathrin; Behrens, Stephan; Ullrich, Martin; Pietzsch, Hans Jürgen; Namazian Jam, Negin; Schmieder, Florian; Sonntag, Frank |
Zeitschriftenaufsatz Journal Article |
| 2022 | Establishing Micro Physiological Systems by means of a radiolabeled anti-EGFR antibody for the evaluation of new radioligands Sihver, Wiebke; Nitt-Weber, Anne-Kathrin; Behrens, Stephan; Schmieder, Florian; Ullrich, Martin; Bachmann, Michael; Kopka, Klaus; Pietzsch, Hans Jürgen; Sonntag, Frank |
Poster |
| 2022 | Topography Analysis and Homogeneity Quantification of Laser-Patterned Periodic Surface Structures Soldera, Marcos; Reichel, Charlotte; Kuisat, Florian; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Determination of the interference spot size using photo-acoustic emission in direct laser interference patterning Steege, Tobias; Schell, Frederic; Belkin, Adrian; Lasagni, Andrés-Fabián |
Konferenzbeitrag Conference Paper |
| 2022 | Erosion behavior of CMAS/VA infiltrated EB-PVD Gd2Zr2O7 TBCs: Special emphasis on the effect of mechanical properties of the reaction products Steinberg, Lars; Mikulla, Christoph; Naraparaju, Ravisankar; Pavlov, Paul; Löffler, Markus W.; Schulz, Uwe; Leyens, Christoph |
Zeitschriftenaufsatz Journal Article |
| 2022 | Influence of Deposition Temperature on the Electrical and Electrochemical Properties of Carbon-Based Coatings for Metallic Bipolar Plates, Prepared by Cathodic Arc Evaporation Steinhorst, Maximilian; Giorgio, Maurizio; Roch, Teja; Leyens, Christoph |
Zeitschriftenaufsatz Journal Article |
| 2022 | Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser-Doppler-Vibrometers Stephan, Richard; Brosius, Alexander; Ewenz, Lars; Zimmermann, Martina |
Konferenzbeitrag Conference Paper |
| 2022 | Printable Reactive Materials for Bonding and Joining Stepien, Lukas; Aslan, Nazik; Tyszler, Magdalena; Lux, Milena; Palluet, Romane; Lopez, Elena; Brückner, Frank; Leyens, Christoph |
Konferenzbeitrag Conference Paper |
| 2022 | Pure Copper: Advanced Additive Manufacturing Stepien, Lukas; Gruber, Samira; Greifzu, Moritz; Riede, Mirko; Roch, Aljoscha |
Aufsatz in Buch Book Article |
| 2022 | Pulsed direct-current reactive sputtering of high Young's modulus [002] oriented aluminum nitride thin films Talukder, A.-A.; Baule, Nina; Steinhorst, Maximilian; Shrestha, Maheshwar; Fan, Q.H.; Schuelke, Thomas |
Zeitschriftenaufsatz Journal Article |
| 2022 | Development and Characterization of a Dispersion-Encoded Method for Low-Coherence Interferometry Taudt, Christopher |
Dissertation Doctoral Thesis |
| 2022 | Method for simple phase recovery and denoising in spectral imaging interferometry based on error-diffusion dithering Taudt, Christopher; Hartmann, Peter |
Konferenzbeitrag Conference Paper |
| 2022 | Laser structuring with DLIP technology of tungsten carbide with different binder content Teicher, Uwe; Baumann, Robert; Bouraoui, Yasmine; Ben Achour, Anas; Lasagni, Andrés-Fabián; Ihlenfeldt, Steffen |
Zeitschriftenaufsatz Journal Article |
| 2022 | Defect-based characterization of the fatigue behavior of additively manufactured titanium aluminides Teschke, M.; Moritz, Juliane; Tenkamp, J.; Marquardt, Axel; Leyens, Christoph; Walther, F. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Characterization of the high-temperature behavior of PBF-EB/M manufactured γ titanium aluminides Teschke, Mirko; Moritz, Juliane; Telgheder, Lukas; Marquardt, Axel; Leyens, Christoph; Walther, Frank |
Zeitschriftenaufsatz Journal Article |
| 2022 | Structural colors with embedded anti-counterfeit features fabricated by laser-based methods Teutoburg-Weiss, Sascha; Soldera, Marcos; Bouchard, Felix; Kreß, Joshua; Vaynzof, Yana; Lasagni, Andrés-Fabián |
Zeitschriftenaufsatz Journal Article |
| 2022 | Laser cladding as a flexible exploration tool for the design of cobalt-free hardfacing coatings made of high entropy materials Vary, Clément; Aubry, Pascal; Guillot, Ivan; Grün, Peter; Kaspar, Joerg; Fernandes Barbosa, Maria Manuel |
Zeitschriftenaufsatz Journal Article |
| 2022 | Schwingfeste Auslegung laserstrahlgeschweißter Welle-Nabe-Verbindungen unter mehrachsiger Beanspruchung Wagner, Markus; Melz, Tobias; Faß, Markus; Jahn, Axel; Baumgartner, Jörg; Standfuß, Jens; Leyens, Christoph |
Konferenzbeitrag Conference Paper |
| 2022 | Digitalized laser beam welding for inline quality assurance through the use of multiple sensors and machine learning Wagner, Markus; Pietsch, Dominik; Schwarzenberger, Michael; Jahn, Axel; Dittrich, Dirk; Stamm, Uwe; Ihlenfeldt, Steffen; Leyens, Christoph |
Zeitschriftenaufsatz Journal Article |
| 2022 | Investigation of the influence of a two-step process chain consisting of laser cutting and subsequent forming on the fatigue behavior of AISI 304 Wanski, Thomas; Zeuner, André Till; Schöne, Sebastian; Herwig, Patrick; Mahrle, Achim; Wetzig, Andreas; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Befestigungsschiene für ein Luftfahrzeug, damit versehene Luftfahrzeugkabine und Luftfahrzeug Werner, Sven; Standfuß, Jens |
Patent |
| 2022 | Zyklischer Ritztest an unterschiedlich dotierten amorphen Kohlenstoffbeschichtungen Wilsnack, Erik; Zawischa, Martin; Makowski, Stefan; Zimmermann, Martina |
Konferenzbeitrag Conference Paper |
| 2022 | Investigation of Variothermal Mould Heating Systems for Processing of High Temperature Thermoplastic Composites in Short Cycles Würfel, Veit; Condé-Wolter, Jan; Pietsch, André Luca; Scheitz, Stefan; Schultz, Davide; Först, Patrick; Garthaus, Christian; Lindenau, Jens; Weber, Tobias A.; Gude, Maik |
Konferenzbeitrag Conference Paper |
| 2022 | Effect of doping elements to hydrogen-free amorphous carbon coatings on structure and mechanical properties with special focus on crack resistance Zawischa, Martin; Weihnacht, Volker; Kaspar, Joerg; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Comparison of fracture properties of different amorphous carbon coatings using the scratch test and indentation failure method Zawischa, Martin; Makowski, Stefan; Kuczyk, Martin; Weihnacht, Volker |
Zeitschriftenaufsatz Journal Article |
| 2022 | Deformation-Induced Martensitic Transformation in Laser Cladded 304 Stainless Steel Coatings Zeuner, André Till; Gerdt, Leonid; Ostwaldt, Andrea; Grün, Peter; Fernandes Barbosa, Maria Manuel; Kaspar, Joerg; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints Zeuner, André Till; Ewenz, Lars; Kalich, Jan; Schöne, Sebastian; Füssel, Uwe; Zimmermann, Martina |
Zeitschriftenaufsatz Journal Article |
| 2022 | Unraveling the Capacitive Charge Storage Mechanism of Nitrogen-Doped Porous Carbons by EQCM and ssNMR Zhang, En; Wu, Yih-Chyng; Shao, Hui; Klimavicius, Vytautas; Zhang, Hanyue; Taberna, Pierre-Louis; Grothe, Julia; Buntkowsky, Gerd; Xu, Fei; Simon, Patrice; Kaskel, Stefan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Mehr Effizienz beim Laserauftragschweißen | Note |
| 2022 | Mehr Effizienz beim Laserauftragschweißen | Zeitschriftenaufsatz Journal Article |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica